CCTV camera housings

Advanced enclosures

CCTV camera housing

2B present a wide range of special camera enclosures.
For advanced CCTV applications high specifications are demanded as size, IP rating, cooling, heating, wiper, washer and material like stainless steel or marine coatings and most of these special cctv enclosures you will find in this section. If you do not find the needed housing in this section then please e-mail your specifications so we can check if we can help you.

To find a pan tilt for the camera housing click here

Cooled camera housing
The housings can be cooled by a double sunshield and to effectively remove the sun rays heat the sunshield can be ventilated by a fan between the two sunshields to remove the heat before it enters the enclosure.

Stainless steel camera housing for marine and high corrosive applications
Stainless steel camera enclosures is typically used in marine enviroment or other high corrosive enviroments.

washers
When an enclosure with wiper is needed a washer system can be added to the system so the remote water spray can be controlled while operation the wiper.

wipers
Some of our housings can be ordered with wiper, most of the wipers are self parking so the wiper will park at the side of the glass.

vandal proof

Pan tilt
To find a Pan and tilt for the camera housing go to the Pan tilt section

Nitrogene
Some housings can be filled with nitrogene.

Germanium window
If a thermal camera will be installed in the camera housing a germanium window is needed.

Nema and IP comparison

Nema and IP are two different standards that rate the degree of protection against solid objects, dust and water to compare the ratings see the below comparison:

More about NEMA IP