PT-1030 pan/tilt “20/50 kg load”
- Load capacity up to 20-45 kg (sidemount 50 kg)
- Direct DC drive
- Made of Aluminum with stainless fittings
- Mechanical lash <0,16°
- IP68 Pan tilt head
Description
The PT-1030 pan tilt is a large sized pan tilt with a load capacity of up to 50 kg and can be controlled by direct DC voltage from a joystick or from an external RS-485 telemetry receiver.
The unit is made of aluminum and all fittings are made of stainless steel. The pan/tilt is IP68 enviroment rated.
For harsh enviroment a special marine painting can be ordered as an option to the pan/tilt.
Specifications for PT-1030 large sized pan/tilt |
|
|---|---|
| Material | Aluminum |
| IP rating | IP68 |
| Load capacity | Top mount 20 kg (30 or 45 kg with gas springs) (side mount 50 kg) |
| Size (LxHxW) | 171 x 251 x 231 mm |
| Weight | 12 kg |
| Pan angle | 0-350° |
| Tilt angle | -90° to +25° |
| Pan speed | 30 or 10°/sec |
| Tilt speed | 10°/sec |
| Absolute position support | Optional |
| Electric position accuracy | 0,5° |
| Mechanical lash | <0,16° |
| Presets | Yes |
| Preset accuracy | 0,5° |
| Motor type | DC motor |
| Gear type | NA |
| End-stop adjustable | Externally by mechanical end stops |
| Interface | 12 or 24VDC direct drive |
| Baud rate | NA |
| Protocol | NA |
| Address | NA |
| Temperature range | -25°C +55°C with optional heater |
| Voltage supply | 12 or 24VDC direct drive |
| Power consumption | NA |
| Motorized lens control | No |
| Aux control | No |
| Video cable | NA |
| Network cable | NA |
Options
-
Gas springs
Optional gas springs are available to higher the load capacity.
-
Side mount
The pan tilt is available with top mount or side mount bracket.
