OHS-1000 Camera housing series

IP66 High quality outdoor housing

Large size up to 655mm internal length

Made of Aluminum and stainless fittings

Multiple options, Cooling, heating, wiper..

Description:

The OHS-1000 camera housing series includes the largest housing in our product line, up to 655mm in internal length. The housing is made of aluminum and all fittings are made of stainless steel.

The housing can be delivered with a selection of many options, double sunshield to avoid sun peak tempertures, active heater thermostatically controlled to heat up the housing above a choosen temperture, wiper, vandal glass, security screws and color options.

Dimensions in mm	OHS-1010	OHS-1020	OHS-1030
Height	190 mm	225 mm	258 mm
Width	150 mm	175 mm	235 mm
Length w/sunsheild	431 mm	601 mm	761 mm
Weigth	2,3 Kg	3,8 kg	5,9 kg
Weigth w/wiper	2,8 Kg	4,3 Kg	6,4 kg
Voltages versions	AC230V or AC24V or DC12V or DC24V
Internal size (LxHxW)	335x115x115	505x143x141	655x175x182
Mounting plate	Galvanic isolating plate
Cable entry	Two 20mm glands and one 25mm blinded hole
Window heater	Self regulating window heater
Housing color	Gray	Gray	Gray/white
Temperature	-25 - +55° C
IP rating	IP66
Fit to pan tilt	PT-1010	PT-1020	PT-1030

Options:

		Wiper The housing can be delivered with a built-in internally mounted wiper motor and external wiper arm. The wiper is activated by supplying voltage to the motor and when turned off the wiper will self park in the side of the window, spray nozzle included.

		Double sunshield The housing can be delivered with a double sunshield as an extra isolation to avoid overheating from the sun rays. The sunshield is made as a clip on type to ease the cleaning and service of the camera housing.

		Active heater The housing can be delivered with a built-in camera housing heater, not the standard window heater, but a heater element that heat up the housing to the temperture selected on the thermostat. The heat from the element is ventilated around the housing with a fan.

		Internal fan The housing can be delivered with a built-in fan to remove hot spots in the housing generated by camera heat or other sources of heat. The fan will equal the heat around the housing.

		Color The housing can be delivered in many colors and coatings. Color of the housing can be important if the housing should blend in the original design of a building, a ship or other applications. The color can also be a factor if the housing should be very visible to work preventive. For marine or other harsh environments the housing can be delivered with a very strong coating to extent the lifetime of the camera housing

		Valdal glass The housing can be delivered with a glass type that are vandal proof. To protect the installed equipment a vandal proof window can be installed.